LED States
The device LEDs provide valuable information about the state of the device and connection.
Service Status LED
LED Color
No Light
Green
Power Button LED
Led Color
No Light
Green
Red
Amber
Blue
Caring for Your Device
As with any electronic device, the device must be handled with care to ensure reliable operation.
Novatel Wireless recommends the following handling guidelines:
Do not apply adhesive labels to the device; they may cause the device to potentially overheat
•
and they may alter the performance of the antenna system.
The USB connector should plug easily into your computer's Type A USB port. Forcing the
•
device into a port may damage the connector.
Protect the device from liquids, dust, and excessive heat.
•
Store the device in a safe place when not in use.
•
Status
—
Solid
Slow Blinking
Intermittent Blinking The device is transmitting / receiving mobile
Status
—
Solid
Glowing
Blinking
Solid
Blinking
Solid
Description
The device is powered off.
The device is powered on and connected to a mobile
broadband network, but is not transmitting or
receiving data.
The device is powered on but there is no service.
broadband data. The blinking rate is proportional to
the data speed.
Description
The device is powered off.
The device is powered on and fully charged.
The device is in standby mode (power saving). Press
the power button to wake up the device.
The battery is critically low.
The battery is charging.
Error. See
Troubleshooting
The device is powered on and roaming.
5
on page 52.