GE PDWT500PWW - Profile 24" Dishwasher Owner's Manual page 4

About the dishwasher control panel.
Youcanlocate gour model n umberonthetubwalljust insidethedoor.Throughout thismanual, f eatures and appearance m abl v arbl f romgourmodel.
Front-Control Dishwashers B -- D
s_._ . .... _...... _...... _....... _ ...... _SmartDisp ....
* ............................................ SELECTIONS OuietPower5 ENHANCEMENTS ..................................................
Top-Control Dishwashers
L.
El El El
O--
El
ENHANCEMENTS _ STATUS
_ONT_OLS 0 LOWgETERGENT tORYiNG
_,_ss ® SENSING 0 SANITIZED
._1_oD_y
_R3 SEC 0 WASHIH6 • CLEAN
El El
Control Settings
O Status Indicator Lights
(Indicatorsvary by models)
TheStatus displagtells you what is happening while the dishwasher is in operation and may flash,
indicating a malfunction.The lights will come ON indicating the sequence of the dishwasher operation.
LOW DETERGENT
SENSING
ADD-A-DISH
WASHING
RINSING
DRYING
SANITIZED
CLEAN
Displagedwhen the SmartDispense
TM
needs to be refilledwith liquid or gel automatic
dishwasher detergent.
NOTE:If gou are not usingSmartDispense
TM
and gou want to turn the LOW DETERGENT
LEDlight off, press the ADDED HEATpad 5 times within 3 seconds.You will hear 3
beeps;then the light will go off.You can turn the light back on bg pressing the ADDED
HEATpad5 times within 3 seconds.
Displagedwhile the Clean Sensor
T M
is measuring the amount of soiland temperature
of water.The dishwasher will adjust the selectedcgcle to achieve optimal performance.
Displaged during prewash, indicating that dishes added now will still be cleaned.
Displagedduring prewash,main wash and rinse periods.
Displaged during rinse periods.
Displagedduring HEATED DRY.
Displagedwhen cgcle has met sanitization conditions.
Displayedwhen a wash cycle is complete.
_J_ Time Remaining Displag Ionsomemodels)
irt
During operation, the display shows the minutes remaining until the cycle is complete. The display may
adjust the remaining time while the Sensinglight is on.The time displayed at the start of each cycle may
change from the factory setting as the unit customizes itselfto home use. During a delay start, the display
will show hours of time remaining until the cycle starts.
Wash Programs (Selections)
Front-ControlDishwashers:Pressthe pad for the desiredwash cblcle.
Top-ControlDishwashers:Usethe Arrow Pads f'_ _ to scroll through the wash cucles.
NOTE:All cycle times and water usage information contained in the following section are approximate
values.Actual results will depend on several factors, including but not limited to inlet temperature,
household water pressureand amount of soil in the wash water.
The light above or next to the selected pad will be ON to indicate which WASHCYCLE has been selected.