Yamaha System Owner's Manual page 2

1
Loosen the locking lever of the FC (FingerClamp) nut. (Fig.
Loosen the locking nut
Locking Lever
2
Pull up the locking levers of the FC tremolo. (Fig.
Pull up the locking lever
3
Loosen the tuning machines to remove the old strings from the
tuning machines in the standard manner. (Fig.
Remove old strings
* The "Tremolo Unit Holder" prevents the tremolo unit from
sinking into the tremolo cavity.
* If the tremolo arm slides away from the arm base, tighten
the screw on the side of the arm base. (Fig.
2
Part 2 : Removing the old strings
)
Loosen
)
Locking Lever
)
)
4
Remove the old strings from the body back. (Fig.
* It is not needed to detach the back cover to remove the
strings.
Pull off old strings
)