Features; Assembly - Ryobi P635K Operator's Manual

PRODUcT SPEcIFIcATIONS
Flow Rate .............................................................. 5.5 GPH
Roller Coverage .............................................58 sq. ft./min.
Tank Size ................................................................. 1.5 gal.
kNOW yOUR bAckPAck PAINTER
See Figure 1, page 15.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
intEGratED StoraGE hooK
The integrated storage hook allows you to hang the power
paint sprayer for storage.
PAINT ROLLER
The paint roller accepts any 9 in. roller with up to 3/8-in.
nap.
POWER PAINT SPRAyER
The power paint sprayer allows you to spray large areas
quickly.
UNPAckING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

Motor .................................................................. 18 Volt DC
Charger Input.................................... 120 V, 60 Hz, AC only
SPRAy TIPS
The two spray tips provided allow you to choose between
three different spray patterns − vertical, horizontal, and
round.
SWitch
With the switch set on forward, paint is pulled from the tank
and flows into the roller or sprayer for easy paint applica-
tion. When the switch is set on reverse, paint is pulled from
the roller or sprayer and put back in the tank. In the center
position, the motor is off.
vARIAbLE PAINT FLOW DIAL
The variable paint flow dial on the roller handle makes paint
flow control quick and easy.

ASSEMbLy

PAckING LIST
Backpack Painter
Power Paint Sprayer
Paint Roller
Roller Head
Roller Handle
Roller Caps (2)
Paint Supply Tube
Replacement Atomizer Valve
Lubricant
Cleaning Brush
12 in. Wide Fan Tip
Battery Pack
Charger
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
7 — English