RocketFish RF-HTS125 Quick Setup Manual

4-outlet Flat-screen Surge
Protector with Noise Filtering
RF-HTS125
QUICK SETUP GUIDE
Congratulations on your purchase of this Rocketfish Surge Protector
with noise filtering.
Your surge protector:
• Provides surge protection for sensitive electronic devices
• Incorporates noise filtering to provide "clean" power that will
maximize the performance of your equipment
Features
Grounded LED
indicator
Side-entry
AC outlets
• Side-entry AC outlets for a total flush-mount installation.
• Compact design—Fits conveniently behind a wall-mounted
flat-panel TV.
• 43 dB EMI/RFI noise filtering—Makes sure that that your
devices receive only "clean" power for maximum product
performance.
• 1,800 joules surge protection—Protects your devices from
damaging power surges and spikes.
• Grounded LED indicator—Lights when a properly grounded AC
outlet is detected. If this LED does not light, contact a licensed
electrician to inspect your wiring.
• Protected LED indicator—Lights when the surge protection
feature is working properly. If this LED does not light or goes out,
the surge protection feature has reached full capacity and can no
longer absorb additional surges and spikes. The surge protector
should be replaced if this light goes out.
Operating instructions
1 Plug the surge protector into the lower outlet of a standard 120V
AC outlet, with the plastic knob in the ground plug of the upper
outlet.
2 Plug the power cords from up to four devices into the side-entry
AC outlets on the surge protector.
Protected LED
indicator
Side-entry
AC outlets