Setting The Current Time; Timer Setting; To Cancel The Timer Setting; Sleep Mode - LG MA09AH1.NF1 Owner's Manual

Operating Instructions

Setting the Current Time

1. Press the TIMER BUTTON for 3 seconds.
2. Press TIME SETTING BUTTONS
until the desired time is set.
NOTE
Check the indicator for A.M. and
P.M.

Timer Setting

1. Press the TIMER BUTTON to
turn timer on or off.
2. Press TIME SETTING BUTTONS
until the desired time is set.
NOTE
Select one of the following 2 types of operation.
Timer On

To cancel the timer setting

• If you wish to cancel all timer setting, press the CLEAR ALL BUTTON.
• If you wish to cancel each timer setting, press the
TIMER BUTTON to turn timer sleep on or off as you want.
And then press the SET/CLEAR BUTTON aiming the remote
controller at the signal receptor.
(The timer lamp on the air conditioner and the display will go off.)

Sleep Mode

Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically.
The timer is programmed in one-hour increments by pressing the SLEEP MODE AUTO BUTTON 1 to 7 times.
The sleep mode is available for 1 to 7 times.
NOTE
• The sleep mode will operate indoor fan at slow speed in cooling mode and at medium speed in heating mode
for pleasant sleep.
• Art Cool and Art Cool Wide (non-Deluxe) close the lower discharge partially in sleep mode for pleasant sleep.
In cooling mode or healthy dehumidification mode:
The setting temperature will rise automatically two times by 1°C over next consecutive 30 minutes (2°C in 1
hour) for a comfortable sleep. Now this will be the final setting temperature as long as sleep mode is functioning.
14 Multi Air Conditioner
3. Press the SET / CLEAR BUTTON.
3. Press the SET / CLEAR BUTTON.
Timer Off