Page of 5


PIXMA iP7200
© CANON INC. 2012


   Also See for Canon PIXMA iP7220

   Summary of Contents for Canon PIXMA iP7220

  • Page 1: Setup Guide

    PIXMA iP7200 series Setup Guide © CANON INC. 2012...

  • Page 2

    Setup Guide This guide provides information for setting up a network connection for the printer. Network Connection Wireless Connection Preparation for Connection Connection Using WPS Troubleshooting...

  • Page 3: Network Connection, Notes On Wireless Connection

    Network Connection Wireless Connection a Preparation for Connection Before Starting Wireless Connection Setup 1. Make sure that the printer is turned on. If the power is on, the POWER lamp (A) will be lit. Notes on Wireless Connection Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your •...

  • Page 4

    b Connection Using WPS 1. Press and hold the Wi-Fi button (A) on the printer when you are ready to press the button on the access point. 2. Make sure that the (blue) Wi-Fi lamp flashes quickly and the POWER lamp is lit as shown in the illustration above, then press and hold the button on the access point within 2 minutes. 3.

  • Page 5

    Troubleshooting When the (blue) Wi-Fi lamp fl ashes slowly and the (orange) Alarm lamp is lit:  • Press the button on only one access point. • Check the security settings of the access point. After checking the above points, wait for a while and confi gure wireless connection setting again. For details on how to check the security settings of the access point, refer to the manual supplied with the access point or contact its manufacturer.

Comments to this Manuals

Symbols: 0
Latest comments: