Table of Contents
Advertisement
Getting started
Set up your projector
SCREEN SIZE AND THROW DISTANCE
You can calculate and define the throw distance as follows.
Projected image
SW
(All measurements below are approximate and may differ slightly from the actual measurements.)
Projection size
Screen diagonal (SD)
1.52 m (60")
1.78 m (70")
2.03 m (80")
2.29 m (90")
2.54 m (100")
2.79 m (110")
You can calculate detailed screen dimensions from the "Screen diagonal". The unit of all the calculation results is
m. (The results below differ slightly from the actual measurements.)
If the projection size is SD,
Screen height (SH)
Screen width (SW)
Throw distance (L)
NOTE:
•
For best projection image quality, install a screen where sunlight or room lightings do not
shine directly onto the screen. Close window shades or curtains to block the light and
turn off the lightings.
•
Do not use the projector at a raised or horizontally tilted position. It may cause the
projector to malfunction.
However, you can tilt the projector's body approximately ±30 ° vertically and ±10 °
horizontally.
Over tilting may result in shortening the component's life.
•
Do not cover the air outlet port and air intake ports or place anything within 50 cm (20") near them as this may cause damage
or injury.
14 ENGLISH
Screen
L
For 4:3 aspect ratio
Throw distance (L) Settable height (H) Throw distance (L) Settable height (H)
0.60 m (2' 0")
0.71 m (2' 4")
0.82 m (2' 8")
0.92 m (3' 0")
1.03 m (3' 4")
1.14 m (3' 9")
For 4:3 aspect ratio
= SD (") × 0.0152
= SD (") × 0.0203
= 0.0107 × SD (") - 0.0389
Screen
0.05 m (0' 2")
0.66 m (2' 2")
0.05 m (0' 2")
0.78 m (2' 7")
0.06 m (0' 2")
0.90 m (2' 11")
0.07 m (0' 3")
1.01 m (3' 4")
0.08 m (0' 3")
1.13 m (3' 8")
0.08 m (0' 3")
= SD (") × 0.0125
= SD (") × 0.0221
= 0.0117 × SD (") - 0.0395
L
For 16:9 aspect ratio
0.17 m (0' 7")
0.20 m (0' 8")
0.23 m (0' 9")
0.26 m (0' 10")
0.29 m (0' 11")
—
—
For 16:9 aspect ratio
+30 °
-30 °
Advertisement
Chapters
Table of Contents
