Table of Contents
Advertisement
17. Another dialog box "PC ADJUSTMENT DISPLAY 2" will appear and the parameter data for the Mode you have
selected is shown in this dialog box.
18. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).
19. To increase the level, point the arrow to A and then press the SELECT (REAR CLICK) BUTTON. To decrease
the level, point the arrow to V and then press the SELECT (REAR CLICK) BUTTON.
20. If you want to store the settings in the memory, move the arrow to Stored and press the SELECT (REAR CLICK)
BUTTON. When you have stored the settings, "OK
then press the SELECT (REAR CLICK) BUTTON.
21. To recall the parameter data before setting, move the arrow to Reset and then press the SELECT (REAR
CLICK) BUTTON. When you have reset the settings, "OK
and then press the SELECT (REAR CLICK) BUTTON. You can adjust the settings again if needed.
22. To quit the MENU, move the arrow to Quit and then press the SELECT (REAR CLICK) BUTTON.
23. If you quit the MENU without storing the settings in the memory, the parameter data you changed will not be
kept.
24. The stored settings are memorized even if the MAIN ON/OFF is switched off.
ITEM
CLAMP
DISPLAY AREA
HORIZ.
SCALE
VERT. SCALE
Adjustment of the clamp level. When the image has a dark bar, try this adjustment.
Adjustment the display area to match your PC.
Expanding or compressing level for the horizontal direction.
Expanding or compressing level for the vertical direction
is displayed for confirmation. Move the arrow to Yes and
?"
is displayed for confirmation. Move the arrow to Yes
?"
FUNCTION
Advertisement
Table of Contents
