5.1. How to Reflash the BIOS
Reflash BIOS in MS-DOS Mode
1. Extract the downloaded Zip file to your hard disk(s) or floppy disk. This procedure assumes drive A.
2. Restart the computer in MS-DOS mode. (For Windows
restart the computer in MS-DOS mode.)
3. Change the command prompt to A:\>.
4. To back up the current BIOS, at the A:\> prompt, type[BIOS flash utility name]
-s [BIOS file name] (example: gvf19 -s NX72G1D.f1) and press Enter.
5. To flash BIOS, at the A:\> prompt, type [BIOS flash utility name] -p [BIOS
file name] (example: gvf19 -p NX72G1D.f2) and press Enter.
6. Wait until it's done, then restart your computer.
5. Appendix
®
- 33 -
2000/XP, you need a startup disk to
Appendix