On/Off Button - VTech Text & Chat Walkie-Talkies User Manual

Please Note: All messages in the mailbox will be deleted when the
batteries are removed from the unit. To avoid damage to any system
data, please do not remove the batteries while the unit is switched on.
TO BEGIN USING THE TEXT & CHAT
WALKIE-TALKIES™
INITIAL SET-UP
Press and hold the On/Off Button for 2 seconds to turn
the unit on. When the unit is first turned on, you will be
prompted to choose a language and avatar.
Use the Left/Right Buttons to make your
selections. Press the OK Button to confirm your
selections. After the initial set-up, the unit will be active in
the walkie-talkie mode.

oN/oFF BUTToN

Press and hold the On/Off Button for 2 seconds to turn the unit on.
Press and hold the On/Off Button again to turn the unit off.
SET-UP MENU
Hold the Left/Right Buttons down at the same time for 2 seconds
to enter the set-up menu. The set-up menu allows you to change your
profile picture, group, language, mail alert sound, and volume. Press the
Left/Right Buttons to make your selection. Press the OK Button
to enter the submenu.
Profile Setting
There are 8 cartoon faces to choose from. Use the Left/
Right Buttons to choose your favorite cartoon
face as your avatar. Press the OK Button to confirm.
Group Setting
To communicate, all the walkie-talkies in your group must
be on the same channel and CTCSS code. There are 4
available groups. The default setting is Group 1. Use the
Left/Right Buttons to change the group setting.
Press the OK Button to confirm.
7