Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Optoma MirrorBoard Q300
Summary of Contents for Optoma MirrorBoard Q300
- Page 1 User’s Guide Optoma MirrorBoard Q300 ...
-
Page 2: Table Of Contents
Index Chapter 1 3. Overview Chapter 2 4. Setting-Up the MirrorBoard 5. Install the Software Drivers 6. Microsoft .NET Framework 2.0 “Windows XP only” 9. Wireless USB WinDrivers 10. USB Tablet Manager 11. Power Presenter RE 12. DisplayLink Graphics Adapter Software 13. - Page 3 Battery Life: 2.5 hours of continuous use Resolution: WSVGA (1024 x 600) The Optoma MirrorBoard gives you the flexibility to control digital content from anywhere in the room, whether you are projecting a lesson in a classroom or a presentation in a corporate conference room.
-
Page 4: Setting-Up The Mirrorboard
USB Charging port Power Adapter Port On/Off Button USB Port for Accessories (e.g., mouse, keyboard) Upper/Lower Rocker Switch Chapter 2 Setting-Up the MirrorBoard There are several tasks that you should perform prior to your first use of the MirrorBoard: 1) Charge MirrorBoard 2) Install Software Drivers 3) Connect MirrorBoard to the Computer for the First Time... -
Page 5: Install The Software Drivers
Install the Software Drivers 1. Insert the included MirrorBoard CD into your computer disk drive. If the menu does not automatically open, locate the CD-ROM drive on your PC and double click on “Autorun.exe.” 2. On the MirrorBoard CD Menu, choose the appropriate drivers for your operating system (Windows XP or Windows 7 / Vista). - Page 6 Once you click on Next, the installation of several drivers will commence, one at a time. Windows may request a restart. Select cancel and do not restart the computer until all drivers are installed. Accept all the default values throughout the installations. Drivers include: a) Microsoft .NET Framework 2.0 (XP only, cancel if already installed) b) Wireless USB WinDrivers c) USB Tablet Manager...
- Page 7 If Microsoft .NET Framework 2.0 is not installed on your computer, you will need to install it using the installation wizard. Click on Next and follow the directions: 7 ...
- Page 8 8 ...
- Page 9 Wireless USB WinDrivers Installation will start automatically. 9 ...
- Page 10 USB Tablet Manager Do not restart! If you mistakenly restart, run the installer again. 10 ...
- Page 11 Power Presenter RE Optional installation: Power Presenter RE is a simple tool that lets you use the pen to markup or annotate any displayed document. 11 ...
-
Page 12: Displaylink Graphics Adapter Software
DisplayLink Graphics Adapter Software 12 ... -
Page 13: Connect Mirrorboard To The Computer For The First Time
After installation of all software, the MirrorBoard Setup Wizard will request that you restart your PC. Click on Restart to comply. A gray icon will appear in the Windows system tray (lower right of the desktop). In Windows 7, you may have to click on the up arrow to show all icons. Connect MirrorBoard to the computer for the first time Plug the included wireless USB dongle into the computer. - Page 14 Windows 7: Click the icon and choose “Advanced Configuration.” Set “Multiple displays” to “Duplicate these displays.” Click “Apply.” Please note that your computer display may adjust. The MirrorBoard automatically sets both the MirrorBoard and the computer display to a common resolution. You may see “black bars” or a lower resolution on MirrorBoard and/or the computer display.
-
Page 15: Calibrate The Pen
Calibrate the Pen The pen must be calibrated prior to first use. Click the Pen Pad icon and choose “Calibration”. Follow the instructions. Set other pen properties according to your preference. Your MirrorBoard is now ready for first use. 15 ... -
Page 16: General Use
Chapter 3 Using MirrorBoard • General Use • Using the Pen • Power Presenter RE • Touch Buttons • Using the MirrorBoard with a Projector General Use On/Off Turn on the MirrorBoard by holding the green button on the top left end of the unit for one second and then releasing it. -
Page 17: Using The Pen
Windows 7: Click the icon and choose “Advanced Configuration” or right click on the Desktop and select “Screen resolution”. Set “multiple displays” to “Duplicate these displays.” Click “Apply.” Please note that your computer display may adjust. The MirrorBoard automatically sets both MirrorBoard and the computer display to a common resolution. -
Page 18: Power Presenter Re
Power Presenter RE Power Presenter RE is a simple tool to use the pen to markup or annotate any document displayed. NOTE: Power Presenter RE only works when MirrorBoard is connected to the computer. If MirrorBoard is not connected, the following error message will appear: Start Power Presenter RE by double clicking the icon on the desktop or by going through the “Start”... - Page 19 19 ...
- Page 20 For additional information, refer to the Power Presenter RE Manual: Start>Program Files> Power Presenter RE> Manual 20 ...
-
Page 21: Touch Buttons
Touch Buttons MirrorBoard has seven touch buttons on the front panel. Activate these buttons with your fingers – Do not the pen. 1) ESC: Allows you to exit current function 2) Decrease display brightness 3) Increase display brightness 4) Page Down 5) Page Up 6) Zoom Out 7) Zoom In... - Page 22 If MirrorBoard does not show the complete desktop, set the computer’s resolution to 800 by 600. (Right click on desktop, select Properties, Settings tab). Windows 7: Make sure that your MirrorBoard is powered on and connected wirelessly to the computer. Then plug in your projector to the PC as you would normally.
- Page 23 Next, click on Screen 2 (Projector), and in the Multiple Displays section, select "Duplicate Displays 2 and 3". Click Apply. Next, select the display that says 2|3. Check the "Make This My Main Display" box, and click Apply. Now, the displays on the MirrorBoard and the projector should be visible. Next, click on screen 1 (or the computer's main display).
-
Page 24: Troubleshooting & Faq's
Chapter 4 Troubleshooting & FAQ’s MirrorBoard is showing the desktop background, but not the icons or Start Menu: MirrorBoard has to be set to “Mirror” mode to show the desktop. Select the DisplayLink icon in your system tray, and select “Mirror” from the list. Your display may flash once or twice and then MirrorBoard should display the desktop. -
Page 25: Fcc Notice
42 Caxton Way, The Watford Business Park Watford, Hertfordshire, WD18 8QZ, UK +44 (0) 1923 691 800 www.optoma.eu +44 (0) 1923 691 888 Service Tel : +44 (0)1923 691865 service@tsc-europe.com FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. - Page 26 Where use is prohibited, turn off the product to prevent the possibility of it interfering with or causing other electronic devices to malfunction. Optoma does not accept any liability for direct or consequential damages.
Need help?
Do you have a question about the MirrorBoard Q300 and is the answer not in the manual?
Questions and answers