Asus M2N GREEN User Manual page 47

3. NVIDIA nForce
®
(7-pin SATA1 [red], SATA2 [red], SATA3 [red], SATA4 [red], SATA5 [red],
SATA6 [red])
These connectors are for the Serial ATA signal cables for Serial ATA 3.0
Gb/s hard disk and optical disk drives. The Serial ATA 3.0 Gb/s is backward
compatible with Serial ATA 1.5 Gb/s specification.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1,
RAID 0+1, RAID 5, or JBOD configuration through the onboard NVIDIA
MediaShield™ controller.
The RAID function of these connectors is set to [Disabled] by default. If you
intend to create a Serial ATA RAID set using these connectors, enable the RAID
Enabled item in the SATA Configuration sub-menu in the BIOS. See section
"4.4.7 Onboard Device Configuration" for details.
M2N-E
R
M2N-E SATA Connectors
ASUS M2N-E
570 Ultra MCP Serial ATA connectors
®
SATA1
SATA5
SATA2
SATA3
GND GND
RSATA_RXN1 RSATA_RXN2
RSATA_RXP1 RSATA_RXP2
GND GND
RSATA_TXN1 RSATA_TXN2
RSATA_TXP1 RSATA_TXP2
GND GND
®
SATA6
SATA4
GND
GND
RSATA_RXN3
RSATA_RXN4
RSATA_RXP3
RSATA_RXP4
GND
GND
RSATA_TXN3
RSATA_TXN4
RSATA_TXP3
RSATA_TXP4
GND
GND
2-2