Table of Contents
Advertisement
10
Internet connections
wireless networks.
3.
Tap Wi-Fi settings. The network names and security settings of detected Wi-Fi
networks are displayed in the Wi-Fi networks section.
4.
If the wireless network you want to connect to is not in the list of detected
networks, scroll down the screen, and then tap Add Wi-Fi network. Enter the
wireless network settings, and then tap Save.
5.
Tap the Wi-Fi network you want to connect to.
If you selected an open network, you will be automatically connected to the
network.
If you selected a network that is secured with WEP, enter the key and then
tap Connect.
Depending on the network type and its security settings, you may also need to enter more
information or choose a security certificate.
When your phone is connected to a wireless network, the Wi-Fi icon
status bar and tells you the approximate signal strength (number of bands that light
up).
The next time your phone connects to a previously accessed secured wireless network,
you will not be prompted to enter the key or other security information again, unless
you reset your phone to its factory default settings.
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (*.p1) to your phone before you can
connect to a Wi-Fi network with EAP-TLS authentication protocol.
1.
Save the certificate file to the root folder of the storage card.
2.
From the Home screen, press MENU, and then tap Settings > Security.
3.
Tap Install from SD card.
4.
Select the network certificate needed to connect to the EAP-TLS network.
5.
Follow the steps in the previous section to connect to the Wi-Fi network.
Checking the wireless network status
1.
From the Home screen, press MENU, and then tap Settings > Wireless &
networks.
2.
On the Wireless & networks screen, tap Wi-Fi settings, and then tap the wireless
network that the phone is currently connected to.
appears in the
Advertisement
Table of Contents
