Table of Contents
Advertisement
Notes
• Operation is not assured in an environment based on an upgrade of the operating
systems described above or in a multi-boot environment.
• If you connect 2 or more USB devices to a single computer at the same time, some
devices, including the camera, may not operate, depending on the types of USB
devices you are using.
• Connecting the camera using a USB interface that is compatible with Hi-Speed USB
(USB 2.0 compliant) allows advanced transfer (high speed transfer), as the camera is
compatible with Hi-Speed USB (USB 2.0 compliant).
• When your computer resumes activity from suspend or sleep mode, communication
between the camera and your computer may not recover at the same time.
Installing "PlayMemories Home"
1
Check your computer environment (page 60).
2
Turn on the camera and your computer, then connect the
camera to the computer using a micro USB cable (supplied).
1
Windows 7: Device Stage appears on the computer.
3
Windows 7: Select "PlayMemories Home" on Device Stage.
Windows XP/Windows Vista: Click [Computer] (in Windows XP,
[My Computer]) t [PMHOME], and double-click
[PMHOME.EXE].
To a USB connector
To the micro
2
USB connector
Micro USB cable
Using the software
GB
61
Advertisement
Table of Contents
