Allow Windows In Install Peripheral Driver(S); Slide Integrator Tray In - Dell OptiPlex Powered USB HUB Product Information Manual

Allow Windows to install peripheral driver(s)
After the hub driver is installed, Windows will install drivers for any peripheral devices attached to the
Powered USB Hub. Power switch for the device (if applicable) should now be turned on. Consult the
specific peripheral's Product Information Guide to ensure that its driver(s) are properly installed.
After the driver is installed, the Port LED should be illuminated Green. If the Port LED is illuminated
Amber, it indicates excessive current is being drawn through the USB connection. If this occurs, shut
the device down, disconnect it form the hub, and consult the device's Product Information Guide.

Slide Integrator tray in

Slide Integrator tray back in. Ensure retaining button is released so that the tray is secured.
Product Information Guide | 16