D-Link DWL-AG132 Manual page 24

Using the Configuration Utility (continued)
Authentication > WPA > Advanced Security Settings
Select the EAP type
here.
Leave the User
Certificate field blank.
Click Validate Server
if your authentication
server requires it.
Enter the User Name.
Click Add and the
window on the following
page will appear.
Click OK to save the
changes.
EAP Type: Extensible Authentication Protocols (EAP-TLS, LEAP, EAP-TTLS,
PEAP) allow devices on the network to request authentication from the
RADIUS server in the network. All the devices on the network must use the
same EAP type when using a RADIUS server for authentication.
User Certificate:
verify that a public key belongs to a specific individual or company. This field
is not required here and is left blank.
Validate Server:
field be selected. Check this field if your RADIUS server requires validation.
User Name: Enter the user name (admin) here.
A certificate authority (CA) issues User Certificates to
Some RADIUS servers require that the Validate Server
24