Dhcp Configuration Of Tcp/Ip In Windows 2000 - NETGEAR WG602NA User Manual

Verify that Obtain an IP address
automatically radio button is selected and
that the Obtain DNS server address
automatically radio button is selected.
Click the OK button.
This completes the DHCP configuration in
Windows XP.
Repeat these steps for each PC with this
version of Windows on your network.

DHCP Configuration of TCP/IP in Windows 2000

After you install a network card, TCP/IP for Windows 2000 is configured and set to DHCP
without your having to configure it. However, if there are problems, follow the steps below to
configure TCP/IP with DHCP for Windows 2000.
Click My Network Places icon on the Windows desktop. This will bring up a window called
Network and Dial-up Connections.
• Right click Local Area Connection and select Properties.
Preparing Your PCs for Network Access
User's Guide for the WG602 v3 54 Mbps Wireless Access Point
202-10060-01, September 2004
D-9