Wireless-G Router for 3G/UMTS Broadband
The Administration Tab - Diagnostics
The Diagnostics screen lets you reboot the Router and run diagnostic tests, which allow you to check the
connections of your network components.
Reboot
Reboot. To reboot the Router, click the Reboot button.
Ping Test
Ping Parameters. The Ping test will check the status of a connection. Click the Ping button to open the Ping Test
screen. Enter the address of the PC whose connection you wish to test and how many times you wish to test it.
Figure 8-53: Administration Tab - Diagnostics
Then, click the Ping button. The Ping Test screen will then display the test results. To stop the test, click the Stop
button. Click the Clear Log button to clear the screen. Click the Close button to return to the Diagnostics screen.
Traceroute Test
Traceroute Parameters. To test the performance of a connection, click the Traceroute button. Enter the address
of the PC whose connection you wish to test and click the Traceroute button. The Traceroute screen will then
display the test results. To stop the test, click the Stop button. Click the Clear Log button to clear the screen.
Click the Close button to return to the Diagnostics screen.
Figure 8-54: Ping Test
Figure 8-55: Traceroute Test
Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband
88
The Administration Tab - Diagnostics