Insignia NS-42L260A13 Quick Setup Manual page 2

4 2" 10 8 0p LC D T V I Q U I C K S E T U P G U I D E I N S - 4 2 L 2 6 0 A 1 3
Connecting an antenna/cable wall jack
Connect a coaxial cable (not included) to the ANT/CABLE IN jack on
the back of your TV and to the Antenna/Cable wall jack.
CABLE
Y / VIDEO
Note: Cable is not provided.
Connecting a home theater system with multiple devices
Cable or satellite TV box
Blu-ray player/DVD player/VCR
We recommend that you connect
the AV receiver's HDMI OUT jack to
your TV's HDMI 2 (ARC) jack.
In the following situations, the
HDMI cable will route Dolby Digital
AV receiver
audio to the AV receiver, so you do
not need to connect a separate
digital audio cable:
• When you have a game console
connected to one of your TV's
Game console
HDMI jacks.
or camera
• When you watch a program
through an antenna or cable TV
connected to the ANT/CABLE
jack.
USB flash drive
Antenna or
cable TV
Computer
(no box)
Connecting power
Plug the AC power cord into the AC IN jack on the back of your TV,
then plug the other end of the cord into a power outlet.
Setting up and using your remote control
1 Press the release button on the back of the remote control to remove
the battery compartment cover.
2 Insert two AAA batteries into the battery compartment. Make sure
that the + and – symbols on the batteries match the + and – symbols
in the battery compartment.
3 Replace the cover.
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Picture
Picture Mode Energy Savings
Brightness 48
Contrast 46
Color 75
Advanced Video
Reset Picture Settings
OK
MOVE SELECT MENU PREVIOUS EXIT EXIT
ENTER
Adjust settings to affect picture quality
Input Source
TV
Component/AV
VGA
USB
HDMI 1
HDMI 2
HDMI 3
Aspect ratio options
Normal:
Displays the original 4:3 aspect ratio with vertical black bars on the left and
right side of the screen.
Zoom:
Expands the image to fill the screen. The top and bottom of the image may
be cropped.
Wide:
Use this option to view content recorded in a 16:9 (wide-screen) aspect
ratio.
Cinema:
Stretches the image at the edges, but keeps a clear image in the center.
Auto:
Automatically adjusts the image based on the screen size and the TV
program. Note: Auto is only available when Auto Zoom in the CHANNELS
menu is set to On.
Programming your remote control
To program your universal remote control to work with your new Insignia TV, see the table for common codes. If you have problems programming your remote or need a
different remote control code, visit www.insigniaproducts.com for the latest remote control code information.
Universal remote controls
One for All Philips RCA Sony Cablevision Charter
0198, 135 068, 069, 068, 069, 078, 2002, 1204, 1423, 1517,
0054
0490 078, 096, 096, 100, 164, 0171, 1963, 0463, 1463,
100, 164, 168, 229, 026 0842, 1326, 167, 415, 424,
168, 229, 450, 456, 461, 507, 523, 567,
026 577, 586
Turning on your TV for the first time
1 Connect your TV's power cord to your TV and a power outlet, then press
Language screen opens.
2 Press ▲ or ▼ to highlight a language, then press ENTER. The Choose Your Time Setting screen opens with
Mode highlighted.
3 Press ◄ or ► to select Auto or Manual, then press ENTER. If you select Auto, the date and time are set
automatically from a digital TV signal. If you select Manual, you can manually set the date and time. Press
ENTER.
4 Press ▲ or ▼ to highlight Home Mode or Retail Mode, then press ENTER. If you select Retail Mode, a
message asks you to confirm your selection. Select Yes or No. Retail Mode is not an energy-saving mode.
5 Press ▲ or ▼ to highlight Antenna, Cable, or Satellite Box, then press ENTER.
A. If you select Antenna, your TV scans for available channels. The scan may take several minutes.
B. If you select Cable, a message asks if you have a cable box.
• Select No if no cable box is connected. Your TV scans for available channels. The scan may take
several minutes.
• Select Yes if a cable box is connected. A message asks how you connected the cable box to your TV:
• Select AV, Component, or HDMI if you connected a cable box to your TV using one of these cables.
Read the message, then press ENTER to close the wizard.
• Select Coaxial if you connected a cable box to your TV using a coaxial cable.
Read the message, then press ENTER to start the channel scan (VHF channels only).
C. If you select Satellite Box, a message asks how you connected the satellite box to your TV:
• Select AV, Component, or HDMI if you connected a satellite box to your TV using one of these cables.
Read the message, then press ENTER to close the wizard.
• Select Coaxial if you connected a satellite box to your TV using a coaxial cable.
Read the message, then press ENTER to start the channel scan (VHF channels only).
Power
Turns your TV on or off.
Quick Launch Inputs
Selects another source
connected to your TV.
Numbers
Enter channel numbers.
.
Enters a digital sub-channel
number (e.g. 4.1).
ENTER
Confirms selections or changes.
MENU
Opens the on-screen menu.
EXIT
Closes the on-screen menu.
INPUT
Opens the Input Source list.
CH-LIST
Opens the channel list.
Volume
Changes the volume.
SLEEP
Sets the sleep timer.
ZOOM
Changes how the picture
displays on the screen.
Universal remote TV codes
Cable/Satellite/Set-top boxes
Comcast Cox Direct TV Dish Network Time Warner
10171, 11204, 11326, 1326, 10171, 11204, 11326, 720 400, 450, 461, 456,
11463, 11517, 11641, 1463 11517, 11564, 11641, 10463, 1463, 0463
11780, 11785, 11892, 11963, 12002
11963, 12002
Choose Your Menu Language 5or63or Choose Your Time Setting
4 Mode
(power). The Choose Your Menu English
Time Zone
2 3
Daylight Savings
Fran ais ç
Year
Month
Espa ñ ol
Day
Time
Move OK Select Previous Exit
ENTER MENU EXIT Move OK Select
ENTER
Set menu language to English, Fran ais ç or Espa ñ ol
If automatic, options are automatically set by TV source
Choose Your TV Source Scanning for Channels
0 Digital Channels
Antenna
5A
Cable 0 Analog Channels
Satellite Box
Channel scan may take 20+ minutes
Move OK Select
Move OK Select MENU Previous EXIT Exit MENU
ENTER ENTER
Channel scan may take 20+ minutes
Select if using an antenna for standard or HD TV
Choose Your TV Source Do you have a Cable Box?
Antenna
5B
No
Cable
Yes
Satellite Box
OK OK
Move Select MENU Previous EXIT Exit Move Select
ENTER ENTER
Select if you have cable service.
How did you connect the
Choose Your TV Source
satellite box to the TV?
Antenna
5C
AV, Component, or HDMI
Cable
Coaxial
Satellite Box
Move OK Select Previous Exit Move OK Select
ENTER MENU EXIT ENTER
Select if you have a satellite box.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your Online User Guide! This
comprehensive guide includes everything
RECALL
Returns to the previous channel. from basic how-to steps to more advanced
Arrows features. A copy of your User Guide is not
Navigates in on-screen menus.
provided in the box but is available online. Go
HOME
to www.insigniaproducts.com, click Support
Opens the on-screen menu.
& Service, enter your model number in the
INFO*
Opens a TV status banner.
Product Search field, then click Search.
CCD
Check out our online community forum at
Turns closed captioning on or off.
www.insigniaproducts.com for helpful
FAVORITE
Opens the Favorite Channel List. information from other Insignia TV owners.
MUTE
Mutes the sound.
Channel
We're here for you
Changes the TV channels.
www.insigniaproducts.com
PICTURE
Selects the video mode.
For customer service, call:
MTS/SAP
877-467-4289 (U.S./Canada markets)
Cycles through mono, stereo, and
secondary audio for analog programs.
AUDIO
Distributed by Best Buy Purchasing, LLC
Selects the audio mode.
7601 Penn Avenue South, Richfield, MN USA 55423-3645
INlink Controls
Controls HDMI-CEC devices
© 2012 BBY Solutions, Inc.
connected to your TV.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand
names are trademarks of their respective owners.
Tivo Verizon
0091 0198,
0490
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
Choose Your Picture Mode
Auto
Atlantic the box but is available online.
4 Home Mode
On
2012
Go to www.insigniaproducts.com,
October Retail Mode
28
click Support & Service, enter your model
08:07 AM
Move OK Select Previous Exit
Previous Exit ENTER MENU EXIT
MENU EXIT number in the Product Search field,
Reduces total power consumption
then click Search.
Previous Exit
EXIT
How did you connect the
cable box to the TV?
AV, Component, or HDMI
Coaxial
Move OK Select Previous Exit
MENU Previous EXIT Exit MENU EXIT
ENTER
Previous Exit
MENU EXIT
ENGLISH 12-0032