Table of Contents
Advertisement
• At every course, both cold and hot water can be selected by
pressing water supply button. (Except, wool course is allowed for
cold water only.)
HOW TO DO PERFORM THE CLEAN TUB SELF-CLEANING
FOR SANITARY WASHING?
To clean the spin basket (Use when the spin basket needs to be cleaned)
• Long use of washing machine in humid places may cause various aerial
germs to adhere to the scale and, hence, form black-colored scale
(mold). It may be harmful to your health.
For your health, perform the Clean Tub Self-Cleaning course every 1-3
months using the [Clean Tub Self-Cleaning] course of the product with
the recommended detergent so as to keep the clean tub clean and
neat.
CLEAN TUB SELF-CLEANING COURSE
Use Clean Tub self-cleaning course for sanitary use.
It is recommended that performing Clean Tub Self-Cleaning course every 1~3
months.
1. Press the
button.
2. Press the Course button to select Clean Tub course.
3. Press the
button.
4. Put the detergent in, and close the lid.
• Use only recommended detergent.
CAUTION
When you performing Clean Tub Self-Cleaning course, do not put laundry in
the clean tub. It may cause damage to the texture, and changing of color.
When Clean Tub Self-Cleaning course has been completed, there may be
some residue on the water. The residue is come from the clean tub itself.
Perform rinse 2~3 times.
• The default time of the soaking is configured to 20 minutes.
• The default water height is configured to high.
TO DO A CLEAN WASHING
To do a socking course washing (When a soft soaking is needed for the aged dirt of clothes)
1. Add the laundry in and press the
2. Press the Course button.
• Select the desired course.
• Select the warm or cold water with the water supply button.
• Wool course is not allowed for soaking.
button.
3. Press the
button.
• Select the soaking time. (20,40,60 minutes)
(Except, the basket-cleaning course is applied for only 20 minutes.)
4. Press the
button.
Add the detergent and softener according to water levels and then, close the
lid.
• For the soaking washing, repeat Start for 1 minute and Hold(Soaking) for 4
minutes before the actual washing cycle starts.
TO FINISH THE WASHING ON A DESIRED TIME
How to reserve washing?
Select this course when you have to go out or do something else.
1. Add the laundry in and press the
• Check if the faucet is open.
2. Press the Delay Start button.
1) It adds I hour in every 3 hours and can be selected
up to 19 hours.
2) It stops washing after the selected time.
• Other course can be selected.
3. Press the
button.
Add detergent and softener in proportion to the water level. Then, close the lid.
• Must add the detergent in the detergent box.
• If the detergent is spread on the laundry directly, some clothes may get
discolored as the start delays.
• If the Delay Start needs to be canceled, press the power button.
• The reserved finish time may be changed depends on the water pressure.
- 9 -
button.
Advertisement
Table of Contents
