Table of Contents
Advertisement
MONTE(BN68-00625A-01)_UK
N The Base Station can be installed vertically or horizontally to best fit the installation location.
Attach or detach the Stand to/from the Base Station using the screws on the bottom of the
Base Station.
N Do not use screws other than those provided. Save the screws for future use if you remove.
N Do not place the Base Station on top of other devices. Do not stack other devices on top of
the Base Station. Keep the ventilation holes open.
N The Client angle can be adjusted (back 15 ° ° ).
N While adjusting the client angle, hold on to the stand so that it
does not move or lift up.
➢
Tilting more than 15 degrees might cause a fall, results in damage to the product.
English-8
4/20/04
08:23 PM
How to Install the Base Station
Adjusting the Client Angle
Page 8
Advertisement
Table of Contents
