Installing the Wall Mount Kit
Note: This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
Wall-Bracket
Set-Bracket
How to assemble the Wall Mount Bracket
1
Mark the location of hole on the wall.
Make over 35mm-depth-hole on the marked location using drill.
Fix anchors
on each hole on the wall.
Connect wall-bracket
anchors
into the wall-bracket
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2
Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Separate the stand from the product after removing the four screws on the stand.
Attach the set-bracket
secure the screws
3
Insert three Hangers of the set-bracket
Fix set-bracket
and wall-bracket
English-56
M4 X L15
Screw: 8EA
to the wall with wood screws
.
onto the rear side of the TV set and
.
into the grooves of the wall-bracket
with screws
M4 X L20
Wood Screw: 4EA
Anchor: 4EA
after fitting
.
Installation Guide
.