Storing The Channels Automatically (Turbo Store) - Samsung CZ-21K5ML Owner's Instructions Manual

ENG
Mode
Adjust
Digital NR
Size
Select Enter
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select
Adjust
P3
Exit
Sort
From
To
Store
Select Adjust
Storing the Channels Automatically
Picture
Custom
: Off
: Normal
Exit
Channel
Exit
VHF1
Channel
: P 1
: P---
: ?
Exit
Storing the Channels Automatically - Turbo Store
12
You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to Ò "Sorting the Stored
ChannelsÓ " on page 16.
1
Press the MENU button.
2
Press the or button to select the Channel .
3 +
Press the or button to select the Auto Store
4 +
Press the or button again.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
5
When searching and storing is complete, the Sort menu is
displayed.
To...
Sort the stored channels
into the desired numerical order
Exit the channel store function
without sorting the channels
If sound does not work regularly after storing channels,
select the sound system that best corrosponds in
" Manual Store" menu (refer to the next page)
Using Turbo search you can store all the channels found in your
country in much less time compared to auto store.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to "Sorting the Stored
Channels" on page 16.
Perform the above mentioned steps to store channels using
Turbo Store. In the third step select Turbo store instead of
Auto store.
Then...
Go to Step 4 of the Sorting
the Stored Channels
procedure on page 16.
Press the MENU button
repeatedly until the menus
disappear.