Table of Contents
Advertisement
3. Enter the second figure.
4. Repeat steps 2 and 3, if necessary.
5. Press the Equal soft key to view the result.
The result appears in the Answer box.
Note: The result is rounded off to six decimal
places.
6. When you have finished, press the
the
Conversion
This menu option allows you to convert one type of
measurement to another.
To convert a value:
1. Scroll to the type of conversion to be performed:
Length, Weight, Volume, Area, and
Temperature. Press the Select soft key.
2. Enter the value to be converted and press the
Down key to enter it into the From field.
You can enter a decimal point (.) using the
key. And you can enter a minus (-) using the
key in Temperature.
3. Select the original unit of measurement by
pressing the Left or Right key. Then press the
Down key to move to the To field.
Refer to the table on the following page for the
units available.
key to exit.
(Menu 7.7)
Organiser
soft key or
147
Advertisement
Table of Contents
