Edelbrock Performer 3764 Installation Instructions

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common
tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable
performing this installation, it is recommended to have the installation completed by a mechanic. If you have any questions, please
call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us a
• DESCRIPTION: The Edelbrock Performer 454 TBI intake manifold is designed for 454 c.i.d. throttle body injected Chevrolet V8s.
It delivers outstanding performance for the street with complete emissions compatibility. Manifold is a stock replacement/street
legal part for 1987-1990 Chevy/GMC trucks with Mark IV, 454 c.i.d. throttle body-injected V8 engines.
• PARTS SUPPLIED WITH MANIFOLD:
Qty. Description
1 3/8"-18 NPTF to 5/8" hose fitting (Front water core)
1 3/8"-18 NPTF to 3/4" hose fitting (Rear water core)
1 1/4"-18 NPTF male to female 90° elbow fitting (Power brake vacuum elbow)
1 3/8"-18 NPTF to 1/4"-18 NPTF adapter fitting (Power brake vacuum)
1 5/16"-18 x 1/2" grade 2 hex cap screw (For throttle cable bracket)
1 1/4" plastic hose vacuum tee (For MAP sensor and transmission vacuum modulator)
1 Spacer; 11/16" O.D. x 7/16" I.D. x .3" (For MAP sensor)
• ACCESSORIES & INSTALLATION ITEMS: Major recommendations are listed below. See our catalog for details. To order a
catalog, call (800) FUN-TEAM, or visit www.edelbrock.com.
• EXHAUST EMISSIONS SYSTEMS: Edelbrock EGR-equipped Performer T.B.I. manifolds are intended as a direct replacement for
their O.E.M. counterparts. All exhaust emissions or emissions-related stock components will be retained and functional.
• THROTTLE BODY INJECTORS: Use only OEM-type throttle body fuel injectors and base gasket. Label all vacuum lines removed
for re-attachment to the T.B.I. The use of aftermarket throttle body injection units is not recommended.
• BRACKETS: The throttle cable bracket from a 1991 454SS truck is required. Use Edelbrock #8019 or GM #10111685. On some
applications, the end of the bracket will need to be cut off. Use a hacksaw to remove about two inches from the end where the
cable housing mounts.
• CRUISE CONTROL: If the factory cruise control rod will not fit, use GM part #14009160.
• EGR VALVE: Manifold will accept OEM EGR valve. If a replacement valve is needed, use GM #17090051.
• WATER JACKET: Do not use the OEM water jacket plate between the injector base and the Performer T.B.I. manifold, as this
water cavity is already cast into the manifold. Use the OEM formed hose from the front water outlet (just below the T.B.I.) to the
front water passage, and the original fitting in the front water passage. It is important to use the correct mixture of anti-freeze
and water in your cooling system, as water only will quickly corrode the intake manifold.
• GASKETS AND SEALANT: Do not use high-performance or competition-type intake gaskets for street applications. Due to
material deterioration under street conditions, internal leakage of both vacuum and oil may occur.
• FIRING ORDER AND CYLINDER NUMBERING: For cylinder numbering and firing order, see Figure 2.
• FINAL TUNING: NOTE: Local emission laws must be checked for legality of injector or ignition changes.
INTAKE MANIFOLD
3764
Performer manifolds deliver excellent driveability and power utilizing the factory OEM distributor settings.
Catalog #3764
Rev. 10/11 - mc
REFERENCE RECOMMENDED GASKET
(None) GM #10181398
Page 1 of 2
454
PERFORMER TBI INTAKE MANIFOLD
For 1987-1990 454 c.i.d. Chevrolet V8

INSTALLATION INSTRUCTIONS

CATALOG #3764
©2011 Edelbrock , LLC
Brochure #63-0403