Download Print this page

Edelbrock Nitrous System 63-71940 Installation Instructions page 2

Universal motorcycle nitrous system

Advertisement

2.0 - IMPORTANT NOTICE
It is the responsibility of the purchaser to follow all guidelines and safety procedures supplied with this product and any other
manufacturer's product used with this product. It is also the responsibility of the purchaser to determine compatibility of this device with
the vehicle and other components.
Edelbrock Corporation assumes no responsibility for damages resulting from accident, improper installation, misuse, abuse,
improper operation, lack of reasonable care, or all previously stated reasons due to incompatibility with other manufacturer's products.
Edelbrock Corporation assumes no responsibility or liability for damages incurred from the use of products manufactured or sold
by Edelbrock Corporation on vehicles used for competition racing. Edelbrock Corporation neither recommends nor approves the use of
products manufactured or sold by Edelbrock Corporation on vehicles which may be driven on public highways or roads, and assumes no
responsibility for damages incurred from such use.
It is the purchaser's responsibility to check the state and local laws pertaining to the use of nitrous oxide for racing applications.
Edelbrock Corporation does not recommend nor condone the use of its products for illegal street racing.
Do
NOT
mount the bottle under the fuel tank. Heat from the engine will cause the bottle pressure to go too high
for the solenoids to open!
3.0 - WARRANTY
Edelbrock Corporation warrants to the original purchaser that the components shall be free from defects in parts and
workmanship under normal use for 90 days from the date of purchase.
Edelbrock Corporations obligation under this warranty is limited to the repair or replacement of any components found to be
defective when returned postpaid to Edelbrock Corporation. The item must be returned with evidence of place and date of purchase or
warranty will be void. The warranty will not apply to any component that has been used incorrectly, repaired, damaged, or tampered with
by misuse, negligence or accident.
4.0 - ITEMS INCLUDED WITH THIS KIT
Qty
1
1 lb. Bottle with -4 Fitting
1
12" -4 Line with
1
1
Fitting -4 Male to 1/8" Pipe
1
Fitting -3 Male to 1/8" Pipe
1
1
Nozzle Tap, 1/16" Pipe Thread
1
1
5.0 - POWER COMMANDER TUNING TIPS
When using the Nitrous System, more fuel may be needed to be delivered to the engine using the Power Commander. To do
this, you can use the Power Commander Faceplate and richen the high RPM. Another way is to go into the Map Program and richen
100% throttle table to the desired amount. Refer to the Power Commander manual for further instructions. Use of a dyno is
recommended for proper tuning.
©2007 Edelbrock Corporation
Brochure #63-71940
Qty
Blue Ends
Nitrous Solenoid
Dry Nitrous Nozzle
.028" Jet
.034" Jet
Qty
1
12'
1/4" Loom, Black, for Wires and to Hold Nitrous Line
1
8'
8'
20
10
1
60" -3 Stainless Line with -3 Hose Ends
1 Pk
Page 2 of 4
Qty
.036" Jet
6 Pole Water Proof Switch
Black Wire
Red Wire
Small Zip Ties
Large Zip Ties
Misc. Electrical Terminals
Catalog #71940
Rev. 2/07 - DC/mc

Advertisement

loading

This manual is also suitable for:

71940