Intelligent Picture Control; Auto Power Off; Showview Extend - Samsung SV-DVD6E Instruction Manual

VCR

Intelligent Picture Control

GB
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
MAIN MENU
2
DVD VCR Option Language
Option
3
Program Clock Install Exit
USER SET
RETURN ➛!!!❿ ENTER
"❷!!
4
5
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
6
ON
IPC :ON

AUTO POWER OFF

:OFF
OFF
SHOWVIEW EXTEND :OFF
7
➛!❿
RETURN " ❷!
8
VCR
Auto Power Off
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
MAIN MENU
1
DVD VCR Option Option Language
Program Clock Install Exit
USER SET 2
RETURN ➛!!!❿ ENTER
"❷!!
3
4
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
5
OFF
AUTO POWER OFF :OFF
2HOUR
SHOWVIEW EXTEND :OFF
3HOUR
➛!❿
RETURN " ❷!!
6
26
During playback, press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
Press the corresponding , or ➛, ❿ buttons to select the
" ❷!
option.
USER SET
Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
Press the corresponding or buttons, until the option is
IPC
" ❷
selected.
Press the ❿!button to select the IPC (intelligent picture control)
option.
When intelligent picture control mode is ON , the sharpness
of the image is adjusted automatically.
To adjust the sharpness manually, press the
❷ button to turn the
OFF
IPC mode .
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
menu disappears automatically.
PICTURE
On completion, press the RETURN button again.
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
Press the corresponding , or ➛, ❿ buttons to select the
" ❷
option.
USER SET
Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
Press the corresponding or buttons, until the AUTO POWER
" ❷
OFF option is selected.
Press the ❿ button, until you select the time of Auto Power off
interval.
OFF 2HOUR 3HOUR
On completion, press RETURN twice to exit the menu.

ShowView EXTEND

To prevent delays or over-runs the VCR has a function called
ShowView EXTEND allowing you to extend the recording time by
up to 60 minutes.
Only use if PDC is not available or set to OFF.
1 Press the SETUP button on the remote control.
2 Press the corresponding , or ➛, ❿ buttons to select the
" ❷
USER SET option.
3
Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding or buttons, until the
" ❷
SHOWVIEW EXTEND option is selected.
5 Press ➛ or ❿ buttons to set the ShowView EXTEND time by
increments of 10 minutes.
6 To turn off, press ➛ or ❿ buttons repeatedly until
OFF
VCR
MAIN MENU
DVD VCR Option Option Language
Program Clock Install Exit
USER SET
➛!!!❿
RETURN ENTER
"❷!!
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF OFF
shows.
10
SHOWVIEW EXTEND :OFF
60
➛!❿!!!
RETURN " ❷
27
GB