Table of Contents
Advertisement
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 18
C h a p t e r 3
B
F
A S I C
U N C T I O N S
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input on the TV's remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this
screen comes up: If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for the first time.) If the
language for the startup screen is not set, the settings may change whenever you turn
the power on or off. Therefore, make sure that you select the language you want to use.
Once you select a menu language, you can change it by pressing the
front panel of the unit for more than 5 seconds with no disc in the unit.
Then the SELECT MENU LANGUAGE window appears again where you can reset
your preferred language.
Setting up EZ-Setup
After the menu language setting is finished, the EZ Setup menu appears.
You can setup PLAYER MENU LANGUAGE, TV Aspect, and PCM Down Sampling to suit your
preference.
1
EZ Setup start?
To begin EZ Setup, press
Yes
the "/❷ buttons to select
No
***Current Settings***
Yes, then press the
Player Menu Language
ENTER button.
TV Aspect
PCM Down Sampling
2
Player Menu Language
Press the "/❷ buttons to
English
select the desired player
Français
Deutsch
menu language, then
Español
press the ENTER button.
Thai
3
TV Aspect
Press the "/❷ buttons to
4:3 Letter Box
select the desired TV
4:3 Pan & Scan
16:9 Wide
Aspect, then press the
ENTER button.
(See page 66)
button on the
EZ SETUP
: English
: 4:3 L-Box
: On
EZ SETUP
EZ SETUP
ENG-18
B
F
A S I C
U N C T I O N S
4
EZ SETUP
PCM Down Sampling
Press the "/❷ buttons to
Off
select the PCM Down
On
Sampling On or Off, then
press the ENTER button.
(See page 62)
5
EZ SETUP
AV Receiver Connected?
If an AV Receiver is
Connected
connected to the TV,
Not Connected
press the "/❷ buttons to
select Connected, then
press the ENTER button.
Press the "/❷/➛/❿
EZ SETUP
buttons to select desired
C
L
LFE
R
item, then press the
Small
Small
On
Small
ENTER button to set the
Small
Small
speaker. (See page 64)
User
END
SL
SR
When finished setting the
speaker, press the
"/❷/➛/❿ buttons to
select END, then press
the ENTER button.
You can also use the
RETURN button to exit.
5
-1
EZ SETUP
AV Receiver Connected?
If an AV Receiver is not
Connected
connected to the TV,
Not Connected
press the "/❷ buttons to
select Not connected,
then press the ENTER
button.
EZ SETUP
Settings complete
Press the ENTER to
Press
ENTER
to exit
finish.
6
Press the MENU button to
exit.
ENG-19
If you want to run EZ Setup again, select
"EZ Setup" in the Setup menu. (See pages 55)
Advertisement
Table of Contents
