Table of Contents
Advertisement
01718A DVD-V12000MC-GB2
5/24/02 9:52 AM
Intelligent Picture Control
GB
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
IPC
:ON
❿
$ ❷
END:RETURN
**
PICTURE
**
IPC
:
OFF
SOFTEN
SHARPEN
--------
*
-----
➛❿
ON/OFF:
❷
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
OPTIONS
OPTIONS
CLOCK
BONUS
LANG
USER SET
➛!!❿!!
ENTER
END:RETURN
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
IPC
:ON
❿
END:RETURN
$ ❷
18
Page 18
1
During playback, press the SETUP button on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding ➛ or ❿ buttons to select the
USER SET
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the
IPC
$
❷
selected.
5
Press the ❿!button to select the IPC (intelligent picture control)
option.
When intelligent picture control mode is
ON
, the sharpness
of the image is adjusted automatically.
6
To adjust the sharpness manually, press the
button to turn the
❷
OFF
IPC mode
.
7
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE
menu disappears automatically.
8
On completion, press the RETURN button again.
When playing back a cassette, the standard is
automatically selected by the DVD-VCP.
When you playback an NTSC-recorded tape on this DVD-
VCP make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
Press SETUP on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding ➛ or ❿ buttons to select the
USER SET
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the
$
❷
SYSTEM
option is selected.
5
Press the ❿ button to select
AUTO
PAL
MESECAM
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCP.
B/W
Black and White
6
On completion, press RETURN twice to exit the menu.
Selecting the Audio Output Mode
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
Option
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi channel.
option is
MIX
Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO
Used to listen to the sound on the normal mono channel.
L R
Used to listen to Hi-Fi stereo sound on the left and right
channels.
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
COLOUR
B/W
.
TITLE
SUBTITLE
Description
KARAOKE SEARCH
L
L R
GB
AUDIO
MARK
RETURN
R
MIX
MONO
19
Advertisement
Table of Contents
