Table of Contents
Advertisement
Symptom
Disc can't be played
The player does not
respond to the remote
control
Distorted or B/W
picture with DVD
No audio at digital
output
Player does not respond – Operations are not permitted by the disc.
to all operating
commands during
playback
Player feels warm
Remedy
– Ensure the disc label is upwards.
– Clean the disc.
– Check if the disc is defective by trying
another disc.
– Aim the remote control directly at the
sensor on the front of the player.Avoid all
obstacles that may interfere with the signal
path. Inspect or replace the batteries.
– Use only discs formatted according to the
TV-set used (PAL/NTSC).
– Check the digital connections.
– Check the SETUP menu to make sure that
the digital output is set to on.
– Refer to the instructions in the disc inlay.
– When the player is in use for a long period
of time, the surface will be heated. This is
normal.
25
Advertisement
Table of Contents
