Motorola WPCI180G User Manual page 19

SECTION 3
3-8
Field
Network
Authentication
Data encryption
SECTION 3, CONFIGURATION
CONFIGURATION
Description
Select if your access point requires
Authentication. The option selected here
must match the Authentication type used by
the AP. The options are:
Open The Open System
System Authentication method is
used, meaning the AP you
are trying to associate with
will not verify the
identification your unit.
Shared The Shared (PSK)
authentication method is
used. You need to share
the same key between
your AP and client.
®
WPA Wi-Fi
(WPA) authentication
(802.1X) is used with an
EAP type.
WPA-PSK WPA authentication
(802.1X) is used with a
pre-shared key.
Motorola recommends using WPA-PSK
because it provides the strongest security
algorithm.
Select the type of security encryption
algorithm used on this network. The
security setting encrypts your wireless
transmission.
WEP Wired Equivalent Privacy
TKIP Temporal Key Integrity
Protocol - changes the
temporal key often (provides
1 Key)
AES Advanced Encryption
Standard (provides 1 Key)
Motorola recommends using AES because
it provides the strongest security algorithm.
Protected Access