Installation; Installation For Main Amplifier - Kenwood KSW-700 Instruction Manual

Installation

Installation for main amplifier

LS-AXD7 (AX-7 system)
Left speaker
CAUTION
Be sure to adhere to the following, or proper ventilation
will be blocked causing damage or fire hazard.
¶
Place the C-AX7 on top of the system when stacking
with C-AX7.
¶
Do not place any objects impairing heat radiation
onto the top of the C-AX7. Leave some space around
the C-AX7 (from the largest outside dimension
including projection) equal to or greater than, shown
below.
Top panel: 50cm Back panel: 10cm
¶
Leave some space around the M-AX7/M-AX700 (from
the largest outside dimension including projection)
equal to or greater than, shown below.
Back panel: 10cm
¶
This unit is using the cooling fan. Do not place the
equipment onto a bed, a sofa, a carpet, or similar.
Sucked-in dust can cause fire.
The power in this equipment will not be completely cut
off from the wall outlet when the power switch is turned
off.
Install the equipment so that the wall outlet is easily
accessible and, in case of emergency, immediately
unplug the power cord from the wall outlet.
C-AX7
(AX-7 system)
0
M-AX7
(AX-7 system)
M-AX700
LS-AXD7 (AX-7 system)
Right speaker
5
EN