Kenwood KRF-X9992D User Manual page 46

How Do I Operate Devices?
4. If you haven't already done so on the CD changer, touch
. This reads all of the disc and track title information
into the CD changer's memory.
5. Set PowerTouch down so that its IR transmitter window is
aiming at the receiver's IR transmitter window. Select
Do not move PowerTouch while it is reading data.
This process may take some time, depending on how many
CDs you have loaded. When the IR light on the receiver goes
out, the receiver is done sending the information to
PowerTouch, and you may move PowerTouch again.
PowerTouch's memory now contains the disc titles of every
CD in the changer with title information.
6. Touch to return to the CD controls.
7. Touch
menu.
To read the loaded track titles and store them in PowerTouch:
1. Make sure you have followed the previous instructions to
read disc data.
2. Touch
3. Touch
4. If you haven't already done so on the CD changer, touch
. This reads all of the disc and track title information
into the CD changer's memory. Touch
controls.
Audio-Video Receiver KRF-X9992D
on Quick Access menu to return to the Music
on the main or Quick Access menu.
.
to return to the CD
.
39