Loading And Replacing The Battery; Basic Operations; In Tuner Source; In Disc Source - Kenwood KDC-1020 Instruction Manual

Basic Operations of remote
Accessory of the KDC-4020

Loading and Replacing the battery

Use one lithium battery (CR2025).
Insert the batteries with the + and – poles aligned properly,
following the illustration inside the case.
2WARNING
Store unused batteries out of the reach of children. Contact a doctor
immediately if the battery is accidentally swallowed.
Do not set the remote on hot places such as above the dashboard.

Basic operations

[VOL.] buttons
Adjusting the volume.
[SRC] button
Each time the button is pressed the source switches.
For the source switching order refer to <Selecting the Source>
(page 6).
[ATT] button
Turning the volume down quickly.
When it is pressed again it returns to the previous level.

In Tuner source

[FM]/ [AM] buttons
Select the band.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
[4]/ [¢] buttons
Tune up or down band.

In Disc source

[4]/ [¢] buttons
Doing track forward and backward.
[DISC+]/ [DISC-] buttons
Doing album forward and backward.
[38] button
Each time the button is pressed the song pauses and plays.
— 14 —