To Begin Play - VTech Peek-A-Boo Ball User Manual

3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
REMARKS: Please note that it is recommended to keep objects from being
inserted into the ball. If an object is inserted through one of
the openings of the ball, please follow these steps:
1. Make sure the unit is turned OFF.
2. Locate the battery box on the unit.
3. Use a screwdriver to loosen the
4. Remove the object from the ball.
If the problem persists, please call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1- 800-267-7377 in Canada, and a service
representative will be happy to help you.

TO BEGIN PLAY

1. Slide the ON/OFF/MODE SELECTOR SWITCH
to the TALKING MODE (
( ) position to turn the unit ON. You will be
greeted with a short tune or a talking phrase.
The LIGHT-UP STAR will flash with the sound.
2. Press one of the CHARACTER BUTTONS to
begin play.
screw on the battery box to take
the battery box out of the ball.
) or MUSIC MODE
4