Batteries; Battery Installation; Battery Notice - VTech MobiGo Touch Learning System Pink User Manual

Battery Installation

Battery Installation
• Make sure the unit is turned OFF.
• Locate the battery covers on the back of
the unit.
• Remove the covers as illustrated.
• Insert 4 X 1.5V size AA AM-3 or LR6
batteries (not included) as illustrated.
• Make sure to replace the battery covers.

BATTERy NOTICE

• Install batteries correctly observing the polarity (+, -) signs to avoid leakage.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are only to be charged under adult supervision (if
removable).
• Rechargeable batteries are to be removed from the toy before being charged
(if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (Ni-MH).
• Remove the batteries from the equipment when the unit will not be used for
an extended period of time.
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
Note: When the MobiGo™ is running on batteries, you may
see this icon appear on the screen
battery power is low, and you should replace the batteries
soon. Battery time remaining once the icon first appears
is approximately 10-30 minutes, depending on the type of
batteries in use.
To preserve battery life, MobiGo™ will automatically turn off after several minutes
without input. Press the ON/OFF button to turn the MobiGo™ on again.
. This indicates that