Introduction; Installing The Stand Or Wall-Mount Bracket; Installing The Stand; Installing A Wall-Mount Bracket - Insignia NS-32E320A13 User Manual

Introduction

Congratulations on your purchase of a high-quality
Insignia product. Your NS-32E320A13 represents
the state of the art in LED TV design and is designed
for reliable and trouble-free performance.
INlink
Enjoy the benefit of having HDMI CEC compatible
products plug and play! No setup is needed! CEC
technology lets different components discover and
communicate with each other. (See page 40 for
instructions on how to use INlink.)
Installing the stand or
wall-mount bracket
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.

Installing the stand

To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
4
Insignia 32" 720p LED TV
www.insigniaproducts.com
NS-32E320A13 Insignia 32" 720p LED TV
2 Secure the base to the stand column with the
four short screws (provided).
Screw type Screw length # of screws
T4

Installing a wall-mount bracket

Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
"Miscellaneous" on page 48.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the three screws that secure the stand
column to the TV screen, then remove the stand
column.
25 mm 4