Page 1
USB 2.0 Card Bus is a 2-in-1 controller. It has two USB 1.1 controllers and one USB 2.0 controller integrated into a single board. Please follow the instruction below for proper driver installation. Hardware USB 2.0 ˙ ports cardbus Software Driver software ! ! ! ! "...
4.1.5 Windows will ask for drivers again; repeat the above process. 4.1.6 Windows will not be able to install the last “PCI Serial Bus controller”; ‡ it is ok. 4.1.7 After installation, restart the system. 4.1.8 To Verify for Successful USB 1.1 controller Installation: Start icon/Settings/Control Panel/System/Device manager.
Page 3
& 4.2.1 After installing the USB 2.0 controller, Windows will install the USB 1.1working driver automatically. 4.2.2 When "PCI Universal Serial Bus" comes up, clicks "CANCEL" to exit the Installation Wizard ` 4.2.3 Insert the driver of USB 2.0 4 Ports Cardbus. (USB 2.0 4 port CardBus) 4.2.4 Restart computer to accept new setting.
Page 4
& 4.3.1 After installing the USB 2.0 controller, Windows will install the USB 1.1 driver automatically. 4.3.2 When "Found New Hardware Wizard" comes up, clicks "CANCEL" to exit the Installation Wizard ` 4.3.3 Insert the driver of USB 2.0 4 Ports Cardbus. (USB 2.0 4 port CardBus) 4.3.4 Restart computer to accept new setting.
& 4.4.1 After installing the USB 2.0 controller, Windows will install the USB 1.1 ‡ d river automatically. 4.4.2 Insert the driver of USB 2.0 4 Ports Cardbus. (USB 2.0 4 port CardBus) 4.4.3 At the “Software Installation” screen, click “Continue Anyway”. 4.4.4 Once the installation is completed, restart computer to accept new default setting.
Page 6
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other damages.