Beaming - Samsung SCH-R530RWBCRI User Manual

Turning Wi-Fi Direct On or Off
1. From the Home screen, touch
The Settings screen displays.
2. Under Wireless and network, touch More settings.
3. Slide Wi-Fi Direct
Direct On, or slide Wi-Fi Direct
turn Wi-Fi Direct Off.
Touch Wi-Fi Direct.The Wi-Fi Direct screen displays,
and your phone scans for available Wi-Fi Direct devices
and lists them under Available devices.

Beaming

NFC
NFC (Near Field Communication) allows data exchange when
you touch your device with another compatible device. This
is used for applications such as Android Beam and S Beam.
1. From the Home screen, touch
Settings.
2. Under Wireless and network, touch More settings.
3. Touch NFC to enable or disable NFC. A check mark
displays to indicate activation.
121
Menu Settings.
to the right to turn Wi-Fi
to the left to
Menu, then touch
Note: NFC must be turned on to use Android Beam or S Beam.
Android Beam
When Android Beam is activated, you can beam application
content to another NFC-capable device by holding the
devices close together. You can beam browser pages,
YouTube videos, contacts, and more.
Turning Android Beam On or Off
1. From the Home screen, touch
Settings.
2. Under Wireless and network, touch More settings.
3. Touch NFC to enable NFC. NFC must be enabled to use
Android Beam A check mark displays to indicate
activation..
4. Slide Android Beam
Android Beam On, or slide Android Beam
the left to turn Android Beam Off.
Menu, then touch
to the right to turn
to