Names And Functions Of Parts - Fujitsu PA03360-B505 - ScanSnap S500 Operator's Manual

1.2

Names and Functions of Parts

This section describes the names of parts and their functions.
■ Front Side
You can also use the scanner without the Stacker.
HINT
1.2 Names and Functions of Parts
Paper chute
Open the cover to use the scanner.
⇒
Opening the cover turns on the scanner.
ADF
(ADF:Automatic Document Feeder)
Paper chute
After opening it, load the documents to be scanned
on this unit.
Side guide
Adjust the side guides to the width of documents so
that the scanned images will not get skewed.
Cover open lever
To open the ADF cover, pull this lever towards you.
Operation button
⇒
Refer to the next page.
Stacker
Before using the stacker, unfold and extend it as shown above.
ScanSnap S500 Operator's Guide
1
3