Back Panel Audio Connectors - Intel BLKDH67CL Technical Product Specification

The back panel audio connectors are configurable through the audio device drivers.
The available configurable back panel audio connectors are shown in Figure 4.
NOTE
The back panel audio line out connector is designed to power headphones or amplified
speakers only. Poor audio quality occurs if passive (non-amplified) speakers are
connected to this output.
For information about
The locations of the front panel audio header and S/PDIF audio header
The signal names of the front panel audio header and S/PDIF audio header
The back panel audio connectors
Item Description
A Rear surround
B Center channel and LFE
(subwoofer)
C S/PDIF out (optical)
D Line in
E Mic in/side surround
F Line out/front speakers
Figure 4. Back Panel Audio Connectors
Product Description
Refer to
Figure 10, page 43
Section 2.2.2.1, page 45
Section 2.2.1, page 42
27