Meat / Crisper Drawer Temperature Control; Crisper Drawer Moisture Control; Filling - Whirlpool WSF5574 A+N Instructions For Use Manual

Meat / crisper drawer temperature control (if installed)
• The cold air is conveyed inside the meat drawer through an
opening between the refrigerator compartment and the freezer
compartment. In this way the temperature inside the meat
drawer is kept lower than the rest of the refrigerator. The air
flow can be adjusted by means of the special slider.
• If you wish to store vegetables in the meat drawer, shift the
control all the way to the left, to the fruit/vegetables setting.
This will prevent any potential damage due to the vegetables
freezing.
Crisper drawer moisture control (if installed)
• The moisture level inside the crisper drawer can be controlled
by moving the slider in the desired position.
• By moving the slider all the way to the right, moisture will be
eliminated from the compartment for better preservation of
fruit and vegetables with peel.
• By moving the slider to the far left, moisture is maintained inside
the compartment for better preservation of leafy vegetables.

Filling

To maximise storage capacity, remove the two drawers/baskets at
the bottom of the freezer compartment and place foods direclty
on the floor of the freezer. Make sure the food does not obstruct
the air vents.
(This applies to appliances with capacity of less than 715 litres).