Table of Contents
Advertisement
Using the Travel Charger
Incorrect
Correct
Important! Verify that the handset battery is installed prior to
connection. If the battery is not properly installed
and the wall charger is connected, the handset
may power off and on continuously, preventing
proper operation.
10
1. Plug the flat end of the Travel Charger into the Power/
Accessory Interface connector and the other end into a
standard AC wall outlet.
2. When charging is finished, remove the flat end from
the interface connector jack on the phone.
Warning! If your handset has a touch screen display, note that
a touch screen responds best to a light touch from
the pad of your finger. Using excessive force or a
metallic object when pressing on the touch screen
may damage the tempered glass surface and void
the warranty. For more information, refer to
"Standard Limited Warranty" on page 220.
Note: Failure to unplug the wall charger before you remove the
battery, can cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon (
warning tone at regular intervals. In this condition, your
phone conserves its remaining battery power, not by turning
off the backlight, but by entering the dimming mode. For a
) blinks and the device sounds a
Advertisement
Table of Contents
