Table of Contents
Advertisement
2. Connect the USB cable to the charging head.
Correct
3. Plug the charging head into a standard AC power
outlet. The phone turns on with the screen locked and
indicates both its charge state and percent of charge.
Warning! While the phone is charging, if the touch screen does
not function due to an unstable power supply, unplug
the USB power adapter from the power outlet or
unplug the USB cable from the phone.
14
Incorrect
4. When charging is finished, first unplug the charger's
power plug from the AC wall outlet, and then
disconnect the USB cable connector from the phone.
Important! If your handset has a touch screen display, please
note that a touch screen responds best to a light
touch from the pad of your finger or a non-metallic
stylus. Using excessive force or a metallic object
when pressing on the touch screen may damage
the tempered glass surface and void the warranty.
For more information, refer to "Standard Limited
Warranty" on page 190..
Turning Your Phone On
Press and hold the
upper right side of the phone) for three seconds.
While powering on, the phone connects with the
network, then displays the Locked screen and any
active Notification alerts.
Power/Lock key (on the
Advertisement
Table of Contents
