Samsung SGH-I497 User Manual page 133

3. Enable the target device's discoverable or visible
mode.
4. Touch the Bluetooth tab and then touch Scan. Touch
Stop at any time to stop scanning.
5. From the list of found devices, touch the target device,
then follow the prompts to complete the pairing:
• If the target device requires a PIN, enter a PIN for the target
device and touch OK. When prompted, enter the PIN on the
target device.
• If the device allows automatic or smart pairing, your device
attempts to pair with the device automatically. Follow the
prompts on your device and the target device to complete the
pairing.
6. Once your tablet is paired with the target device, touch
next to the device name in the Paired devices list.
• Touch Rename to change the named of the paired device.
• Touch Unpair to unpair from the paired device.
• Touch other options under Profiles as required.
Disconnecting a Paired Device
Disconnecting a paired device breaks the connection
between the device and your tablet, but retains the
knowledge of the pairing. At a later point when you wish to
reconnect the device, there is no need to setup the
connection information again.
1. From a Home screen, touch
Settings.
2. Touch the
turn Bluetooth On.
3. Touch a previously paired device.
A Disconnect? pop-up displays.
4. Touch OK.
Note: Disconnections are done manually, but often occur
automatically if the paired device is out of range of the
device or the device is powered off.
Apps
OFF / ON icon next to Bluetooth to
Connections 127