Security Menu - MSI EX310 User Manual

4-8

Security Menu

Change Supervisor Password
When this function is selected, a message box will appear on the screen as
below:
Enter New Password
Type the password, up to six characters in length and press [Enter]. The
password typed now will replace any previously set password from CMOS
memory. You may also press [ESC] to abort the selection without entering
a password.
When the Supervisor Password is set, the new item User Access Level
and Password Check will be added in the menu. You can make advance
settings of access right in the User Access Level item. Setting options:
No Access, View Only, Limited and Full Access. The Password Check
item is used to specify the type of BIOS password protection that is
implemented. Settings are described below:
The password prompt appears only when end users try to
Setup
run Setup.
A password prompt appears every time when the Notebook
Always
is powered on or when end users try to run Setup.