Before Using The Wireless Lan - Fujitsu N7010 - LifeBook - Core 2 Duo 2.26 GHz User Manual

Before Using the Wireless LAN

This manual describes the procedures required to properly set up and configure the integrated Wireless
LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN
device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for
future reference.
Wireless LAN Device Covered by this Document
This document is applicable to systems containing one of the following WLAN devices:
•
Optional Integrated Intel WiFi Link 5100 (150 Mbps Tx/300 Mbps Rx, 802.11 a/b/g+n)
•
Optional Integrated Intel WiFi Link 5300 (450 Mbps Tx/Rx, 802.11 a/b/g+n)
Characteristics of the WLAN Device
•
The WLAN device is a Mini-PCI card attached to the main board of the mobile computer.
•
The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating
license. The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower,
middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands.
•
The wireless LAN devices are capable of four operating modes, IEEE802.11a, IEEE802.11b, IEEE802.11g,
and IEEE802.11n (draft)
•
The WLAN device is Wi-Fi certified and operates at a the maximum data rate of 540 Mbps (theoretical) in
IEEE802.11n (draft) mode; 54 Mbps in IEEE802.11a or IEEE802.11g mode; and 11 Mbps in IEEE802.11b
mode.
•
The WLAN device supports the following encryption methods - WEP, TKIP, CKIP, and AES encryption.
•
The WLAN device is compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, CX4.0.
147 - Before Using the Wireless LAN