Table of Contents
Advertisement
Appendix
i1,,,11
ii,ii .....
_,,,,,_,,_,,, ,_,,,,_, _,_,,_ _,,1111, ,
Before detaching
(or attaching)
stand, unplug the AC cord from the AC iNPUT terminal
• Do not remove the stand from the TVfDVD unless using an optional wall mount bracket to mount ito
Before attachingldetaching
stand
• Before performing
work make sure to turn off the TV/DVD
• Before performing
work spread cushioning
over the base area to lay the TV/DVD on This will prevent it from
being damaged
f
1
Soft cushion
Unfasten
the four screws
used to secure
the stand in
place
2
Detach
the stand from the TV/DVD
{Hold the stand so it will not drop from the edge of the
base area )
• To attach the stand, perform the above steps in reverse order
• Installing the TVIDVD requires s pecial ski!l that should only be performed by qualified service person nelo Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury,
Using an optional bracket to mount the TVIDVD
• You can ask a qualified service professional
about using an optional AN-26AG I bracket to mount the TVIDVD
to the walt,
• Carefully read the instructions that come with the bracket before beginning
work
f
....
Hanging on the wall
Wall mount bracket (See the bracket instructions for details )
Vertical mounting
Angular mounting
About setting the TVfDVD angle
Angle of TV/DVD : up to 20 °
f_
f_
irt :
k_
,,
• DETACH
THE CABLE CLAMP
ON THE REAR OF THE TV/DVD WHEN
USING THE OPTIONAL
MOUNT
BRACKET
(_-
55
Advertisement
Chapters
Table of Contents
