Starting Warm Engine; Stopping Engine - Echo PB-265L Operator's Manual

STARTING WARM ENGINE

The starting procedure is the same as Cold Start except DO NOT close
the choke.
1. Throttle Position Lever
Move throttle position lever (A) to start/idle detent posi-
tion( ).
2. Purge Bulb
Pump purge bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line.
3. Recoil Starter
Pull recoil starter handle (D) and engine should start.
NOTE
If engine does not start after 5 pulls, use cold start procedures.

STOPPING ENGINE

1. Throttle Position Lever
Move throttle position lever (A) to idle detent position(
allow engine to return to idle before shutting off engine.
2. Move throttle lever (A) to "
If engine does not stop when throttle lever is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using blower
again.
" (Stop) position.
WARNING
P
OWER
O
PERATOR
) and
B
LOWER
13
' M
S ANUAL
A
C
D
A